Pictures

All pictures below are products that made on Videx machines and line.

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Stainless steel bars cutting machine, Videx bar feeder and impact cutter
Made on VC-20
Closed eye bolt made on Videx VAS-20 machine, 12 mm in diameter
Weld studs, from coil: cut, straightening, chamfer, facing, drilling, aluminum ball insert, cold heading, Videx weld-studs line pressing the head with the aluminum ball
wood screw thread and regular thread
Weld studs, from coil: cut, straightening, chamfer, facing, drilling, aluminum ball insert, cold heading, Videx weld-studs line From ribbed wire
Weld studs, from coil: cut, straightening, chamfer, facing, drilling, aluminum ball insert, cold heading, Videx weld-studs line Smooth wire with heading on the other side
Weld studs, from coil: cut, straightening, chamfer, facing, drilling, aluminum ball insert, cold heading, Videx weld-studs line made from smooth wire 1"
Weld studs 1"
Dual threaded bolt
Dual threaded bolt
Roll straightened long bolt
Stainless steel T-bolt threading
Countersank square neck bolt
Roofgrip bolt
T-bolt rolled on Videx VA
M-22x1.5 wheel bolt, rolled and knurled on videx VA
Hanger bolt
Battery caps bolt
Round head bolt
3/4" thread
Battery Bolts
Rolled on Videx VA-K. Knurll and thread
Square Head, forged on Videx forging line
Extruded and Forged on Videx Forging line
Turned, Extruded, Forged and Threaded on Videx Forging line
M-64 bolt, hot forged
2.75" hot forged hex bolt
Hot forged 1.75" and 2.5" hex bolt
Hot forged 2" hex bolt, from bars to finished product
Fully threaded, fully automatic from coil, made on VAS machine
U bolt machine, from bars or coil
Rolled chamfer on wall tie
Made on Videx VAS-10 BH machine
Isolation studs, fully automatic machine
Wall tie machine, fully automatic from wire
Chain pins, made on Videx VAS-15-D
Radiator Hook made on Videx VS-BH from blanks, threading and bending
J hooks made on Videx VAS-25-BH
Anchor Bolt M10
Padlocks, made on Videx machine, fully automatic
Anchor Bolt with stamping
Wood screw hook, made on Videx VAS machine
All made on Videx VAS-20 machine
Eye bolt, open eye bolt and closed eye bolt, made on Videx VAS-20 machine
Threading on rebar wire after extrusion
Extrusion on Rebar wire
Extrusion on Rebar wire
Very long extrusion for SDS drill bits
Very long extrusion for SDS drill bits
2" blanks percentage of extrusion
2" extruded part
Extruded T-bolt
This product was made on Videx VAS-20-DE, a special model that extrude on both end and then threaded the extruded area
22mm, extruded on VEM
Made on Videx VC machines, straightening the wire, cutting to length, chamfer on both ends
Double-headed and bent part
Muffler Hangers
Muffler Hangers cold-formed
Cold formed up to 2" pins, used in bridges and construction purposes
2,000 mm long hex bolt
Gripping forming ribs under the head
This long bolt are used for cable drum
Cold headed hex bolt
Cold formed hex bolt from wire. This product was made on our VAS-TRH machine. 2,000 mm hex bolt
Cold formed hex bolt from wire. This product was made on our VAS-TRH machine. 2,000 mm hex bolt
B7 studs with chamfer (without thread)
B7 studs with chamfer (without thread)
B7 studs stamped on Videx Machine
B7 Studs - Cut & Chamfer & Stamp & Thread
B7 Studs - Cut & Chamfer & Stamp & Thread
Made on Videx impact cutter, up to 3" from bars.
This is some text inside of a div block.